What to Ask Before Buying a Victron Energy Inverter Charger

€ 45.00

4.7
(255)
En stock
Descripción

Looking for the right Victron Energy inverter charger for your off-grid project or business application? Here are questions you should ask and answer.

Similar to the MultiPlus-II 2x120V, the Quattro-II 2x120V is a combined inverter and charger specifically designed for standard North American 50A 120/240VAC split-phase applications. Additionally, it can accept two AC inputs and automatically connects to the active source.

Whether it is supplied from shore power or a generator, the Quattro-II 2x120V can accept and pass through both lines of a 120/240V supply, with the capability to utilise the full 50A for charging and AC loads. When connecting to a single-phase 120V supply, the L1 input of the Quattro-II 2x120V will accept incoming power for charging and passthrough while combining the L1 and L2 outputs for single-phase 120V on each line.

The Quattro switches to inverter operation when no AC sources are available. The inverter output is also 120V single-phase. In inverter mode, the Quattro-II 2x120V internally connects both lines L1 and L2 together to provide 120VAC to loads on either output. Therefore, in all connection circumstances, both sides of a distribution panel will be supplied with 120V. However, 240VAC is only available when the Quattro is supplied by a split phase 120/240VAC source. This prevents heavy loads such as water heaters or 240V air conditioners from discharging the battery.

The Quattro-II 2x 120V has all of the expected features of our versatile inverter/charger range, including PowerControl, PowerAssist, Input Current Limit, two AC outputs, as well as parallel and 3-phase configuration for larger capacity VE.Bus systems. Suitable for LiFePO4 batteries and a variety of other battery technologies.


For local pick-up only

  • 3000 Watt 48vdc Inverter/Charger, 120 vac input and output
  • 250 Volt DC Solar Charger @ 60A (1200+W of solar potential)
  • 2 Wire Generator Auto Start
  • GX Touch display screen with remote access and monitoring
  • Pre-mounted and programmed to your specifications

Price includes wiring and programming for Lithium batteries. 

 


For local pick-up only

  • 5000 Watt 48vdc Inverter/Charger, 240 Volt input and 120/240 output
  • 450 Volt DC Solar Charger @ 100A (5000+W of solar potential)
  • 2 Wire Generator Auto Start
  • GX Touch display screen with remote access and monitoring
  • Pre-mounted and programmed to your specifications

Price includes wiring and programming for Lithium batteries.


The inverter charger is the heart of a Victron Energy system. Here are a few important questions we ask customers to consider before buying.

Victron Energy Multiplus is a powerful compact 24-Volt 2000VA 50 amp 120V true sine wave inverter and a sophisticated battery charger with adaptive

Victron Energy MultiPlus Compact 2000VA 24-Volt Pure Sine Wave Inverter 50 amp Battery Charger

Victron Energy 12/2000/80 MultiPlus Inverter/Charger (New Version) - PMP122200102 - Vanlife Outfitters

Inverter/Charger The Castle, and other RV's

Inverter/chargers - Victron Energy

Victron Energy MultiPlus 3000VA 24-Volt Pure Sine Wave Inverter 70 amp Battery Charger, UL-Certified

Victron MultiPlus II 48/5000/70/50 not charging anymore - Victron Community

Victron Energy 12/3000/120 MultiPlus Inverter/Charger - PMP122301102 - Vanlife Outfitters

Two AC inputs with integrated transfer switch The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. Two AC Outputs The main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected.

Victron Energy Quattro 5000VA 48V Inverter Charger QUA485021100

Multi+ Duplicating Watts readings on a 230v Split Phase with Autotransformer - Victron Community

MultiPlus Inverter / Charger 12 V / 1300 W / 70 A only 909,95 €

2 x Multiplus split phase setup with ESS - Victron Community